Rolls PM351 User Manual download pdf (Page 3)

DESCRIPTION

LINE INPUT: 1/4" TRS stereo jack for connection to a line level source such as a

mixer monitor/auxiliary output, cassette player output, CD player output etc.

ground lift: Header jumper for disconnecting chassis ground from pin 1 of the Mic

Input and Mic Thru.

MIC THRU: XLR jack paralleled (hard-wired) to the MIC INPUT jack for pass-through

to a mixer or other microphone level input device.

MIC INPUT: XLR balanced jack for connection to a condenser or dynamic micro-

phone.

INSTRUMENT INPUT: 1/4" TRS stereo jack for connection to an instrument or line

level signal such as a guitar processor, keyboard, or instrument preamp output.

MONO/STEREO JUMPER: Selects whether the INST. INPUT jack is mono or stereo.

LEFT/RIGHT OUTPUTs: Electronically balanced 1/4" TRS outputs of the Instrument

Input.

ground lift: Header jumper for disconnecting chassis ground from the 1/4" TRS instru-

ment output jacks.

MONO/STEREO JUMPER (Located below the LINE INPUT): Selects whether the

LINE INPUT jack is mono or stereo.

NOTE: When in MONO mode, the ring of the

jack may be used to "phantom power" the PM350. See the OPERATION section for

details.

DC IN 12 VDC: For connection to the external Rolls PS27 power adapter.

HEADPHONE OUTPUTS:1/4" Stereo jack, and 1/8" stereo jack for connection to

stereo headphones or earphones.

LINE LEVEL: Adjusts the level of signal from the LINE INPUT to the headphone mix.

MIC LEVEL: Adjusts the level of signal from the MIC INPUT to the headphone mix.

INST. LEVEL: Adjusts the level of signal from the INST. INPUT to the headphone mix.

SCHEMATIC

1 2 3 4

No comments

Rolls PM351 User Manual Page 3